PT Inotek Pratama · (021) 452-52-87 · admin@inotekpratama.com · WhatsApp (+62) 821-1396-3063
Dehumidifier Type
D-2500
STANDING FLOOR DESICCANT ROTOR DEHUMIDIFIER
Dehumidifier Type D-2500 has a capacity of 14 kg/hour at 20ºC and 60% RH with an air flow of 2500 CMH.
01 Specifications
Specifications for D-2500
- Type
- D-2500
- Normal Capacity
- 14 kg/h
- Dry air flow
- 2500 m³/h
- Static Pressure at disposal
- 200 Pa
- Heater power
- 16 kW
- Maximum electric consumption
- 18 kW
- Supply fuse 3 x 230/400V 50Hz
- 50/25 A
- Weight
- 160 kg
02 Troubleshooting
Common problems and how to handle them
If your problem is not listed here, contact our after-sales team.
The unit does not function
- Check that the fuse in the plug is ok.
- Check the plug is inserted in mains and mains power is on.
- Is tank full light on? Check water tank and empty if necessary.
- Check if the float of the water tank is blocked by foreign material. Is the float of water tank correctly positioned?
- Is the unit standing upright and level?
Abnormal noises from the motor
- Check and clean the air filter
- Is the unit standing upright and on a level surface?
The unit leaks water
- Has the unit been tipped?
- Check if the float of the water tank is blocked by foreign material.
Changes in temperature at the air outlet
- Is the unit on “Standby” or “Normal” operation status?
- The internal heater of the appliance will be switched on/off automatically.
After the unit has been switched off, the fan motor is still running
- After the unit stops, about two minutes are needed to cool down the electric heater by running the internal fan.
The water tank was not properly inserted into the unit
- Make sure to insert the water tank in its right position.
- Is the float of the water tank correctly positioned?
03 Related Units
Other types in Standing Floor Desiccant Rotor
Ask about D-2500 availability
Tell us the room size and its humidity conditions.